BeforeAfterIndustrial Chemical Cleaning & Water Treatment Services
We remove water scale, oil deposits, rust, sludge and algae from cooling towers, chillers, boilers, heat exchangers and production machinery using KCA chemicals. Clients pay only for the chemicals; on-site application by our technicians carries no service fee and can be scheduled at night or on holidays to avoid production disruption.
2008Established
KCAOfficial sole distributor
No feeApplication service & survey*
24/7Emergency support
*Complimentary site survey within Greater Jakarta.
BeforeAfter
Drag to compare the chiller fan cleaning
About Us
Industrial chemical maintenance since 2008
PT Sinar Karya Sejahtera (SKS) was founded in January 2008. Our head office and showroom are in Kapuk, Jakarta, with a branch office in Cikarang close to the Bekasi and Karawang industrial estates.
SKS is the official sole distributor of KCA chemical maintenance products in Indonesia. Our service goes beyond supplying chemicals. Our technicians survey your site, inspect the equipment, calculate the exact chemical requirement and carry out the cleaning to completion, with no separate service fee. We then help maintain your equipment through a scheduled water treatment program.
Most of our clients are manufacturing companies. We also serve hotels and hospitals whose cooling systems and utilities must operate continuously.
“SKS focuses on cleaning and maintaining machinery with the right chemicals, so your equipment performs at its best every day.”
Services
Three service lines, one technical team
Chemical Cleaning & Descaling
Equipment that operates with water or oil accumulates internal deposits over time, including water scale, oil deposits, sludge, rust and algae. These deposits impede heat transfer, causing higher operating temperatures, increased power consumption and a greater risk of breakdown. We dissolve them with chemicals selected for the specific problem.
| Chemical type | Removes | Typical use |
|---|---|---|
| Acid-based + corrosion inhibitor | Water scale (lime, calcium, magnesium), rust, sludge, algae | Cooling towers, condensers, boilers, water side of heat exchangers |
| Alkaline high pH | Water-soluble oil and grease deposits | Oil coolers, moulds, machine parts |
| Solvent-based non water-based | Stubborn oil deposits on components that must not contact water | Gear boxes, oil side of heat exchangers, electrical parts |
Our acid cleaners contain a corrosion inhibitor, so they dissolve scale without attacking the metal. The method depends on the equipment: circulation flushing, dip tank soaking or spraying. Chemicals are supplied in 25 kg / 25 L pails.
“We choose the chemical for the case at hand, not one product for every problem.”
Water Treatment (Cooling Towers & Chillers)
Once the equipment is clean, the next step is to stop scale, rust and algae from coming back quickly. We do this with water treatment chemicals dosed according to an analysis of your site's water.
Open system
Cooling towers
The water is exposed to air, making it the most prone to scale, corrosion and algae. We use a scale & corrosion inhibitor plus a biocide for algae control.
Closed-loop system
Chillers, radiators, diesel cooling
The focus is preventing corrosion, sludge and biological growth inside the loop. We use a corrosion inhibitor designed for closed systems.
Our routine program
2x a week
Technician visits to dose chemicals and clean the area around the unit.
1x a month
Water analysis in our lab with regularly calibrated Hanna Instruments meters: pH, conductivity, total hardness, silica, iron (Fe), sodium, magnesium and other minerals.
What you gain
- Efficient heat transfer and lower power use
- Longer intervals between cleanings
- Longer equipment life
- Fewer production stoppages
Coating & Painting
Cleaned surfaces need protection so they do not rust again quickly. Coating helps the cleaning results last longer.
- Epoxy coatingPipes, water tanks, cooling tower basins, chemical-exposed areas
- Self-levelling coatingProduction floors
- High-heat paintUp to 538°C for chimneys and genset exhausts
- Polyurethane coatingFloors, walls and tanks in pharma, F&B and hospitals
- Alkyd enamelSteel structures, lamp posts, outdoor equipment
- Floor markingWalkways and safety lines in production areas
Equipment
Equipment We Clean & Maintain
Select a card to see which parts we clean and coat.
Cooling TowerLiang Chi, Liang Hoo, Durakool, Baltimore, etc.
- Cleaning
- Fill, basin, louvers, concrete basin
- Coating / Painting
- Fibre & epoxy basin lining, outer body, pipes, support frame, motor body
Chiller
- Cleaning
- Evaporator tubes, condenser coil/fins, absorber
- Coating / Painting
- Outer body, piping
Boiler
- Cleaning
- Water-side tube descaling, fire-tube carbon deposits, economizer
- Coating / Painting
- Cover and outer body
CompressorAir-cooled & water-cooled
- Cleaning
- Oil-side tubes, air-side coil, intercooler, aftercooler, oil cooler
Heat Exchanger
- Cleaning
- Water side, oil/lubricant side
AHU & FCU
- Cleaning
- Fins/coil, tubing, blower, drain lines
- Coating / Painting
- AHU floor, body and cabinet
NH3 CondenserMycom, Baltimore, Evapco
- Cleaning
- Water side, tube exterior
Generator Set
- Cleaning
- Radiator, water jacket, turbocharger, cooling tower, economizer
- Coating / Painting
- Exhaust, genset body
Production Machinery
- Cleaning
- Plastic injection moulds, coolers & hoppers, quenching oil coolers, gear boxes, calender rolls
Tanks & Basins
- Cleaning
- Clean water tanks, WWTP, hydrant, fuel tanks (diesel/HSD/residue)
- Coating / Painting
- Water- and chemical-resistant fibre & epoxy lining, tank exterior
Piping
- Cleaning
- Water lines, process lines, canteen/restaurant drains
- Coating / Painting
- Colour-coded pipe coating
Transformers & Panels
- Cleaning
- Transformers, panels
- Coating / Painting
- Transformer room floor, panel boxes
LPG Vaporizer
- Cleaning
- Gas side, water side
Floors
- Coating / Painting
- Production floors, walkways, markings
KCA Products
The KCA chemical maintenance range
SKS is the official sole distributor of KCA. Every product comes with an MSDS and labels that meet ISO standards. Select a product to view its full specifications. To request a TDS or MSDS in PDF format, please contact us via WhatsApp.
KCA-201Emulsion Degreaser
Emulsifying degreaser for grease, oil and dirt, rinses off with water.
Function
Degreaser for grease, oil, nicotine, dust and dirt. KCA-201 emulsifies and breaks the bond of oil and grease so the soil can be dissolved and rinsed away with water.
Benefits
- Dissolves grease, oil and dirt
- Safe on steel, stainless steel, plastic, wood, vinyl, glass, cement and ceramics
- Effective with hot or cold water
- Economical: dilutes 1 L to 5–10 L of water
- Non-flammable and non-corrosive
- Biodegradable
Applications
Workshop floors, engine rooms, generator rooms and ship decks.
Directions
- Apply by wiping, soaking or spraying.
- Use neat or diluted; dosage depends on the soil.
- Allow 2–30 minutes of contact time.
- Rinse with clean water and wipe dry.
Packaging
25 L pail
Application photos
KCA-202Paint Stripper
Strips all types of industrial paint; non-corrosive and phenol-free.
Function
Formulated to strip all types of industrial paint. Non-corrosive, safe on metal and free of toxic phenol.
Benefits
- Removes all paint types
- Safe on metal
- Composition: chlorinated solvents, activators, emulsifiers, corrosion and embrittlement inhibitors
Applications
Hotels, workshops, industry, fabrication, aeronautics, marine and other heavy industries.
Caution: Use in a well-ventilated area with gloves and eye protection. Rinse skin contact with plenty of water.
Directions
- Apply to the painted surface.
- Leave for 2–30 minutes depending on thickness, age and type of paint.
- Once lifted, clean off with a brush or solvent spray.
Packaging
25 kg pail
Application photos
KCA-206Coil Cleaner
Metal-safe cleaner for coils, evaporators and AHUs.
Function
A coil cleaner that combines cleaning agents with an inhibitor so its organic acids are non-corrosive. Works immediately without etching metal.
Benefits
- No strong odour
- Contains a corrosion inhibitor
- Easy to use
- Biodegradable and environmentally safe
- Economical: can be diluted with water
Applications
Evaporators, coils and AHUs. Also surfaces covered in rust, water scale, lime and mineral deposits.
Directions
- Switch off all electrical components, including fans.
- Dilute with water as needed, typically 1 part KCA-206 to 4–5 parts water.
- Wet the surface with water first.
- Apply by spraying, brushing or soaking.
- Leave for 5–10 minutes, then rinse thoroughly with water.
- Let the coil dry; the unit is ready to use.
Packaging
25 kg / 25 L pail
Application photos
KCA-210Drain and Sewerage Opener
Dissolves organic blockages in toilets, sinks and drains.
Function
Quickly dissolves organic blockages such as paper, tissue, cloth, soap, cotton, rice, sanitary pads, bones and other organic matter.
Benefits
- Safe for PVC, ceramics, pipes and septic tanks
- Hygienic, practical 5 L pack
- Cheaper than dismantling the piping
- Lowers sanitation maintenance costs
Applications
Sinks, WCs and manholes.
Packaging
5 L gallon
Application photos
KCA-212General Purpose Cleaner
Concentrated all-purpose cleaner, dilutes up to 1:30.
Function
All-purpose cleaner and light degreaser that does not strip or etch floor or vehicle paint and leaves no residue. Excellent for removing grease, oil and dirt from dishes, pots, glasses and silver-plated items.
Benefits
- Highly effective cleaning
- High concentration, dilutes up to 30 parts water
- Safe for skin and users
Applications
Floors, kitchenware and silver-plated items.
Directions
- Floor cleaning: 1 part KCA-212 to 10–20 parts water.
- Kitchenware/silver-plated items: 1 part to 10–30 parts water.
Packaging
25 L pail
KCA-218Electrical Motor Cleaner
Cleans dynamos and electric motors without dismantling; fast-drying, 40,000 V dielectric strength.
Function
Removes grease, oil, dust and dirt from dynamos and electric motors without full disassembly.
Benefits
- Non-flammable, non-corrosive, non-conductive, odourless
- Fast-drying, saves time and labour
- High dielectric strength: 40,000 V
- Easy and practical to use
Applications
Motors, coils, contactors, generators, AC and compressor motors, turbines, radar equipment and other sensitive equipment that must not be cleaned with alcohol or water.
Directions
- Spray or brush KCA-218 onto the soiled area.
- Loosen dirt with a brush.
- Wait a few minutes for KCA-218 to evaporate.
Packaging
25 L pail
KCA-219Rust Remover
Water-based rust remover that leaves metal ready for painting.
Function
Water-based solution that removes rust and stains from metal surfaces, leaving them clean and ready for painting or further treatment.
Benefits
- No strong odour
- Non-flammable, non-explosive
- Ozone-safe
- Biodegradable, does not pollute effluent
- Economical: can be diluted with water
Applications
Drilling and refineries, heavy industry on land, sea and air: exhaust pipes, boilers, steel tanks, steel pipes and other metal equipment.
Directions
- Brush on or immerse.
- Leave 5 minutes to 1 hour depending on rust thickness and metal, then rinse with water.
- Typically diluted 1 part KCA-219 to 3–5 parts water.
Packaging
25 kg pail
KCA-225Cutting Oil
Soluble cutting coolant with corrosion inhibitor and biocide.
Function
Water-soluble oil-based cutting coolant with corrosion inhibitors and biocide/fungicide for lubrication and cooling. For machining ferrous and non-ferrous metals: milling, turning, drilling, cutting, grinding and sawing.
Benefits
- Protects cutting tools and extends tool life
- Corrosion inhibitor prevents rust
- Forms a stable emulsion with water
- Biocide inhibits bacteria and microorganisms
- Additives for accurate results and a smooth cut finish
Applications
Milling, turning, drilling, cutting, grinding and sawing machines.
Dosage
- Rough cutting: 1:10 to 1:35
- Grinding: 1:40 to 1:80
- Milling, turning, cutting: 1:20 to 1:40
Packaging
25 L pail
Application photos
KCA-280Power Blue
Concentrated solvent degreaser with rust inhibitor for engine parts.
Function
High-concentration cleaner, free of acid and alkali, for vinyl, plastic, glass, oily concrete floors and heavy parts such as engine components and engine blocks. Widely used for degreasing oil tanks and dusty or oily surfaces.
Benefits
- Solvent degreaser with rust inhibitor
- Dissolves grease and oil effectively
- Economical: can be mixed with kerosene or diesel
- Safe for users
Applications
Workshop floors, oil coolers, pumps, machine parts and engine blocks.
Directions
- Soak: use neat or diluted with kerosene/diesel, soak parts 30 minutes or until grease softens, then rinse with water.
- Surfaces: brush, scrub or spray on, leave 10–15 minutes, then rinse with clean water.
Packaging
25 L pail
KCA-289Safety Solvent
Low-odour, metal-safe solvent for oil, grease and adhesive residue.
Function
Multi-purpose solvent that dissolves light soil, dust, grease, oil and adhesive residue.
Benefits
- Safe on metals
- High flash point
- Low solvent odour, safe for users and the environment
Applications
Machine parts and metal surfaces contaminated with oil and grease.
Directions
- Surface cleaning: spray or pour on, leave for a few minutes, then wipe dry or rinse with clean water.
- Dip tank: soak parts in KCA-289 for 5–10 minutes or until oil/grease dissolves, then air-dry or wipe dry.
Packaging
25 kg / 25 L pail
Application photos
KCA-711Wire Rope Lubricant
Wire rope and chain lubricant with molybdenum disulfide.
Function
Dual-function wire rope lubricant with molybdenum disulfide that lubricates and forms a protective coating. High-grade bituminous base with extreme-pressure, anti-wear, anti-oxidation, anti-rust and anti-corrosion additives. Penetrates the rope and dries to a tough film in 20–30 minutes so sand and dust do not stick.
Benefits
- Reduces wear and friction under high pressure
- Penetrates into the rope core
- Dries to a film in 20–30 minutes, repels sand and dust
- Protects against rust and corrosion
Applications
Wire ropes and steel cables, chains, derricks, cranes, hoist ropes, guy wiring and cargo chains.
Directions
- Apply by brush, by pouring, or mechanically via drip oilers or pressure-fed applicators.
Packaging
20 kg pail
KCA-806Cooling Water Treatment
Prevents scale and corrosion in cooling towers.
Function
Controls corrosion and scale in cooling tower systems.
Benefits
- Prevents scale: minerals stay dissolved and soft and leave via bleed-off before they stick. Per manufacturer data, 0.46 cm of scale can cut heat transfer by up to 28%.
- Prevents corrosion with a thin protective film on metal surfaces
- Safe on copper, bronze, galvanised steel, aluminium and iron
- Free of lead, mercury, arsenic, acid and chromates; biodegradable
- Compatible with monoethylene glycol anti-freeze
Applications
Cooling towers and open recirculating cooling water systems.
Dosage
- Initial treatment: 50–100 ppm of total make-up water volume
- Maintenance: 50–100 ppm
Packaging
25 kg / 25 L pail
Application photos
KCA-815Algae Treat
Controls algae, bacteria and slime.
Function
Biocide that controls bacteria, slime and algae. Active ingredient: quaternary ammonium chloride (water-based).
Benefits
- Effective algae control in cooling towers and pools
- Skin-safe, no special protective clothing needed
- Biodegradable and non-toxic
Applications
Cooling towers, swimming pools, and as a disinfectant for locker rooms and pool surroundings.
Dosage
- Cooling tower, initial dose: 100–200 ppm of total volume
- Cooling tower, maintenance dose: 50–150 ppm of total volume
- Pool-area disinfectant: 80 ml KCA-815 per 25 L of water
Packaging
25 kg / 25 L pail
KCA-818Closed System Corrosion & Scale Treatment
Corrosion protection for chillers, radiators and diesel engine cooling.
Function
Protects closed cooling systems from corrosion caused by oxygen and dissolved minerals, and prevents scale inside the system.
Benefits
- Maintains energy efficiency
- Nitrite-based corrosion inhibitor
- Compatible with anti-freeze
- Chromate-free, safe for all metals, seal-safe
Applications
Radiators, chillers, diesel engine cooling. Keeps heat exchangers, AHUs and valves corrosion-free.
Directions
- Determine the system water volume.
- Drain and refill the system water if needed.
- Dosage: 10 L of KCA-818 per 1,000 L of system water.
- Keep nitrite at a minimum of 100 ppm; top up with KCA-818 if lower. Overdosing is harmless.
Packaging
25 kg / 25 L pail
KCA-822Scale Remover
Removes rust and scale from coolers, cooling towers and heat exchangers.
Function
Dissolves rust, magnesium and calcium scale, and water scale.
Benefits
- Contains a corrosion inhibitor, far less aggressive to metal than ordinary strong acids
- Produces no hazardous fumes
- Cost-effective: dilutes up to 1:10 with water
Applications
Descaling of heat exchangers, AHU tubing, evaporating equipment, inside heating & cooling coils, coolers and condensers.
Directions
- Use 5–20% of total system volume depending on scale thickness.
- Method (circulation or soaking) is set by our technicians during the survey.
Packaging
25 kg pail
Application photos
KCA-830Heavy Duty Scale & Rust Cleaner
For heavy scale and rust in cooling towers, boilers and condensers.
Function
Removes lime, calcium, magnesium and water scale, cement, soap residue, algae and rust from metal and copper surfaces.
Benefits
- Penetrates deep and breaks the bond between scale and the surface
- Corrosion inhibitor protects copper and stainless steel components
- Non-flammable, free of solvents and alcohol
- Cost-effective: dilutes up to 1:10 with water
Applications
Descaling of bundle tube condensers, cooling towers, stainless steel evaporating equipment, boiler water systems, condensers.
Caution: Not for aluminium or galvanised steel.
Directions
- Dilute up to 1:20 with water depending on scale thickness.
- Dosage and method are set by our technicians during the survey.
Packaging
25 kg / 25 L pail
Application photos
KCA-880Hot Water System Treatment
Hot water system treatment that reduces hardness and prevents corrosion.
Function
For small to medium hot water systems. Reduces hardness by converting scale-forming minerals so they stay soft and non-adherent and can be removed through regular blow-down. Contains an oxygen scavenger that removes dissolved oxygen to prevent corrosion.
Benefits
- Prevents scale in hot water systems
- Oxygen scavenger prevents corrosion
Applications
All hot water systems. Not for systems in direct contact with food (not food grade).
Dosage
- Maintenance dosage 20–100 ppm depending on water quality.
- Dose as deep into the system as possible for maximum reaction time.
Packaging
25 L pail
KCA-1172High Heat Paint
Heat-resistant paint up to 538°C.
Function
Heat-resistant paint for metal surfaces operating at high temperatures.
Benefits
- Withstands up to 538°C (1000°F)
- Excellent adhesion
- Solvent resistant
- Fast drying: 10–20 minutes
Applications
Genset exhausts, vehicle exhausts, heaters, chimneys and hot components in industrial, automotive and marine use.
Packaging
5 L gallon · silver aluminium and black
Application photos
KCA-1175Epoxy Coating
Epoxy lining for tanks and immersed surfaces.
Function
Epoxy coating that forms a hard, durable layer against rust and corrosion. Well suited to lining water tanks.
Benefits
- Resists acids, alkalis, bacteria, corrosion and weather
- Withstands immersion in drinking water, seawater, kerosene, diesel/residue, jet fuel, petrol
- Heat resistant up to 80°C
Applications
Water tanks, fuel tanks, immersed or chemical-exposed surfaces.
Directions
- Surface clean and dry. Grind or sandblast steel.
- Mix 4 parts Epoxy : 1 part Hardener by volume.
- Thin with KCA-1587: 5–10% (brush/roller), 50–100% (spray).
- Apply by brush, roller, airless spray (2,400–3,000 psi) or conventional spray (80 psi).
Drying time
Touch dry 60 minTack free 4 hRecoat 6 hFull cure 24 h
Packaging
1 kit = 4 kg base + 1 kg hardener
Application photos
KCA-1178Alkyd Synthetic Enamel
Glossy anti-rust paint for metal and wood.
Function
High-gloss alkyd paint that protects surfaces from rust and direct sunlight.
Benefits
- Hard, glossy finish
- Effective rust and corrosion prevention
- Fade-resistant
- Fast drying and easy to apply
Applications
Metal, wood, industrial equipment and steel structures.
Packaging
5 kg gallon
Application photos
KCA-1179Thinner for Alkyd & Alkyd Urethanes
Fast-drying thinner for alkyd and alkyd urethane paints (KCA-1178).
Function
High-quality fast-drying solvent formulated to thin alkyd urethane-based paints, including KCA-1178.
Benefits
- High-quality solvent
- Fast-drying formula
Applications
Thinner for KCA-1178 Alkyd Synthetic Enamel Paint.
Caution: Flammable. Use with adequate ventilation and keep away from ignition sources.
Directions
- Brush/roller: 1 part KCA-1178 paint with 5–10% KCA-1179.
- Spray: 1 part KCA-1178 paint with 50–100% KCA-1179.
- Stir paint and thinner until uniform.
Drying time
Touch dry 20 minTack free 2 hRecoat 6 hFull cure 24 h
Packaging
5 L gallon or 20 L pail
KCA-1580Polycoat
Polyurethane coating for hygienic areas.
Function
Two-component polyurethane/polymer coating (acrylic polyol + isocyanate) forming an elastic, tough, abrasion- and scratch-resistant film.
Benefits
- Resists rust, corrosion, algae and mould
- Waterproof
- Weather and UV resistant, non-yellowing
- Resists acids, alkalis, oils, petrol, detergents, salt water
- Heat resistant to 80°C; hard yet flexible
Applications
Pharmaceutical, food & beverage and hospital facilities, WWTP tanks, fibre basins, carbon filter and resin tanks. For floors, walls, ceilings, metal, masonry and wood. Coverage: 1 kg + ½ L KCA-1581 thinner ≈ 6 m² @ 50–70 microns.
Directions
- Surface clean and dry, free of oil, dust and rust.
- Mix 4 parts PU Base : 1 part PU Hardener by volume.
- Thin up to 50% with KCA-1581 if needed.
- Apply by brush, roller, airless or conventional spray.
Drying time
Touch dry 2 hTack free 4 hRecoat 8 hFull cure 24 h
Packaging
Contact us
Application photos
KCA-1581Thinner Polyurethane
Thinner for KCA-1580 polyurethane coatings.
Function
Solvent thinner formulated for polyurethane-based paints such as KCA-1580 Polycoat.
Benefits
- Designed for polyurethane coating systems
Applications
Thinner for KCA-1580 Polycoat.
Directions
- Mix 4 parts KCA-1580 PU Base with 1 part Hardener.
- Brush/roller: add 5–10% KCA-1581.
- Spray: add 50–100% KCA-1581.
- Stir until uniform, then apply by brush, roller, airless spray (2,400–3,000 psi) or conventional spray (80 psi).
Packaging
5 L gallon or 20 L pail
KCA-1586Self Leveling Coating
High-gloss, anti-slip epoxy self-levelling coating for concrete floors.
Function
Two-component high-gloss epoxy self-levelling finish that forms a thick, tough, anti-slip coating. Available in many colours; resistant to impact, abrasion, friction and chemicals.
Benefits
- Protects concrete from mechanical abrasion
- Withstands heavy-load friction and impact
- Anti-slip surface
- Chemical-resistant and easy to clean
Applications
Floors and walls of warehouses, assembly plants, parking decks, workshops, food processing plants and WWTP tanks. Coverage: 1 kg ≈ 1 m² at 1,000 microns.
Directions
- Surface clean and dry, free of oil, dust and rust.
- Prime with KCA-15126 Consealer (undercoat) and KCA-1560 Mortar (middle coat).
- Mix 75% Base with 25% Hardener.
- Apply with a trowel and level with a spike roller as the top coat.
Drying time
Touch dry 3 hTack free –Recoat –Full cure 24 h
Packaging
1 kit = 3.5 kg base + 1.5 kg hardener
Application photos
KCA-1587Thinner Epoxy
Thinner for KCA-1175 and KCA-1599 epoxy coatings.
Function
Solvent thinner formulated for epoxy-based paints such as KCA-1175 Epoxy Coating and KCA-1599 Corr-Pro.
Benefits
- Designed for epoxy coating systems
Applications
Thinner for KCA-1175 and KCA-1599.
Directions
- Brush/roller: 1 part paint with 5–10% KCA-1587.
- Spray: 1 part paint with 50–100% KCA-1587.
- Stir paint, hardener and thinner until uniform.
Packaging
5 L gallon or 20 L pail
KCA-1588Rust Stopper
Converts rust into a protective magnetite layer ready for primer.
Function
Treats rust in three stages: neutralises rust into a magnetite (Fe₃O₄) layer, forms an anti-corrosion barrier, and acts as an undercoat ready for primer.
Benefits
- Stops rust
- Forms an anti-rust coating
- Serves as an undercoat
- Suitable for copper, zinc, aluminium, brass, galvanised steel and iron
Applications
Rusted metal surfaces before painting.
Directions
- Clean off oil, loose rust, grease and dirt.
- Pour into a small bucket and brush on. Do not return leftovers to the pail.
- Apply two coats within 30 minutes; the colour turns from white to black.
- Allow 24 hours before priming.
Packaging
5 L gallon
KCA-1599Corr-Pro Epoxy Metal Primer
Anti-corrosion primer.
Function
Two-component epoxy polyamide anti-corrosion primer with rust-inhibiting pigment.
Benefits
- Anti-corrosion base coat for metal
- Can be used as a build-up filler coat
Applications
Primer for iron and steel. Filler on cement render, concrete, steel, wood and masonry.
Directions
- Surface clean and dry, free of oil, dust and rust. Grind or sandblast steel.
- Mix 4 parts Base : 1 part Hardener by volume.
- Thin 10–50% with KCA-1587 if needed.
- Apply by brush, roller, airless or conventional spray.
Drying time
Touch dry 1 hTack free 4 hRecoat 6 hFull cure 24 h
Packaging
1 kit = 4 kg base + 1 kg hardener
Application photos
KCA-15126Consealer (Epoxy Surface Sealer)
Clear epoxy sealer: waterproofs concrete and bonds subsequent coatings.
Function
Clear two-component epoxy that acts as both a sealer/base coat and a bonding layer on concrete.
Benefits
- Waterproofs concrete
- Bonds base coat to subsequent coatings
Applications
Concrete waterproofing, bonding primer for floor paint, ceramics and PE plastic (thinner 1:½), and wood-to-wood adhesive (no thinner).
Directions
- Surface clean and dry; grind steel surfaces.
- Mix 2 parts Base with 1 part Hardener by volume.
- Thin up to 50% with the specified thinner per application.
- 1 kit covers approx. 10–15 m².
Drying time
Touch dry 2 hTack free 4 hRecoat 8 hFull cure 24 h
Packaging
1 kit = 2 kg base + 1 kg hardener
Application photos
KCA-1721Epoxy Insulating Varnish
Epoxy insulating varnish for exposed terminals and wiring.
Function
Tough, flexible insulating varnish that protects exposed terminals and wiring. Forms a coating resistant to dust, dirt, salt water, acids and chemicals, with high dielectric strength and heat resistance.
Benefits
- Resists corrosion, chemicals, moisture, acids, salt water, dust and dirt
- Epoxy-based, does not crack easily
- Penetrates evenly and dries quickly
- Strong adhesion, longer-lasting than lacquer
Applications
Field coils, exposed metal, bus bars, electrical windings, frayed insulation, commutator ends, collector rings, motors and transformer armatures.
Directions
- Thermal class: Class F (155 °C), conforms to ASTM D3251. Max temperature 300 °F.
- Resistant to thinner, petrol and motor oil. Flammable.
Drying time
Touch dry 15 minTack free –Recoat 60 minFull cure 48 min
Packaging
Aerosol, 12 cans per box
KCA-1730Moly Dry Lubricant
Molybdenum disulfide dry lubricant for pressures up to 20,000 psi.
Function
Dry lubricant containing molybdenum disulfide that performs under pressures up to 20,000 psi. Ideal for assembly work and conveyor lines.
Benefits
- Withstands pressures above 20,000 psi
- Withstands temperatures up to 399 °C
- Penetrates pores and bonds firmly
- Non-conductive, dust-repellent, anti-rust
- Contains no oil or grease
Applications
Automotive and industrial gaskets, screw threads, hinges, gears, shafts, metal belts, conveyor belts and drive chains. Also when assembling or dismantling motors, machines, pumps, compressors and valves.
Packaging
Aerosol, 12 cans per box
KCA-1733Belt Dressing
V-belt dressing that prevents slipping and squealing.
Function
Formulated to coat V-belts to prevent slipping and squealing and stop belts slipping off pulleys. Recommended every 60 days as part of preventive maintenance.
Benefits
- Increases belt grip by up to 50%
- Eliminates belt squeal
- Prevents slipping and breakage
- Extends belt life
Applications
Flat industrial belts and V-belts on transmissions, water pumps, fans, generators, power steering, AC units and AHUs.
Directions
- Spray sparingly from 20–30 cm, with the belt running or stopped.
- Aim at the pulley and the inner surface of the V-belt.
Packaging
Aerosol, 12 cans per box
Application photos
KCA-1735Open Gear & Wire Rope Lubricant
Molybdenum lubricant for open gears, bearings and wire ropes.
Function
Molybdenum disulfide lubricant that forms a film resistant to fast, heavy friction. Ideal for metal-to-metal contact under high pressure up to 20,000 psi.
Benefits
- Penetrates thick wire ropes and cables
- Protects bearings from wear
- Prevents rust and corrosion; water-resistant and does not melt with heat
- Free of ozone-depleting substances and chlorinated solvents
- Temperature range −18 °C to 121 °C
Applications
Bearings, open gears, slings, elevator cables, tractors, conveyor rollers, construction machinery and trucks.
Directions
- Shake the can, fit the extension tube if needed, and spray directly onto the part.
- Allow 3–15 minutes before restarting the equipment.
Packaging
Aerosol, 12 cans per box
KCA-1736Silicone Lubricant
Multi-purpose silicone lubricant: stops squeaks, waterproof, rustproof.
Function
Multi-purpose silicone lubricant for hinges, locks, windows, doors, gates, drawers, padlocks, wheels and zips. Stops squeaks, prevents locks and hinges from seizing or rusting, and protects and shines leather, chrome, steel, vinyl and nylon.
Benefits
- Waterproof and rustproof
- Odourless and colourless
- Insulating, non-conductive
- TCE-free
Applications
Fan belts, metal-to-metal and metal-to-rubber contact, hinges, cabins, rubber and plastic parts, ignition locks, and moisture protection for electronic circuits.
Packaging
Aerosol, 12 cans per box
KCA-1738Welding Anti-Spatter
Non-flammable weld anti-spatter; surfaces can be painted straight after.
Function
Forms a film that prevents weld spatter from sticking during welding.
Benefits
- Stops spatter hardening around the weld
- Saves cleaning time, labour and cost
- Non-toxic (no carbon tetrachloride) and non-flammable
- Suits all welding types; surfaces can be painted immediately
Applications
All welding work.
Packaging
Aerosol, 12 cans per box
Application photos
KCA-1750Crack Detector (C, P, D)
Cleaner, penetrant and developer set for detecting surface cracks.
Function
Locates cracks and flaws in metal, ceramic, porcelain, plastic and other solids accurately and at low cost, without special equipment and without damaging the test piece. Consists of KCA-1750C Cleaner, KCA-1750P Penetrant and KCA-1750D Developer.
Benefits
- Penetrates the smallest pores
- Fluorescent colour, easy to see
- Works on metal, porcelain and plastic
- Easy to use and non-flammable
Applications
Leak testing, welds, forgings and castings.
Directions
- Clean the area of stains, oil, rust, paint and flux with KCA-1750C Cleaner.
- Spray KCA-1750P and allow 5–10 minutes to penetrate.
- Wipe off excess so penetrant remains only in the cracks.
- Spray a thin coat of KCA-1750D; cracks show bright red on a white background.
Packaging
Aerosol, 12 cans per box
KCA-1759Penetrating Fluid
Penetrating fluid that frees seized and rusted fasteners and parts.
Function
Solvent-lubricant blend with strong penetrating power to free seized and rusted components. Sprays directly and creeps into hard-to-reach places.
Benefits
- Reduces the risk of snapping seized bolts
- High capillary action
- Saves time and effort
- No pungent odour, non-corrosive, safe on chrome and paint
Applications
Bearings, pipes, pumps, hinges, valves, screws, pulleys, shafts, conveyor rollers and other seized parts.
Directions
- Shake the can and spray directly onto the rusted, seized part.
- Wait about 1 minute, then loosen with the appropriate tool.
Packaging
Aerosol, 12 cans per box
Application photos
KCA-1785Electrical Contact Cleaner
Fast-evaporating electrical contact cleaner, 32,000 V dielectric strength.
Function
Aerosol cleaner for grease, oil, dust, dirt and moisture. Non-flammable, evaporates quickly without residue, non-conductive, and does not damage paint, coatings or component materials.
Benefits
- Practical and fast-drying
- High dielectric strength: 32,000 V
- Non-flammable and non-conductive
- Non-corrosive and odourless
Applications
Electrical components, panels, circuits, audio-video equipment, telecoms, computer instruments, motors and switches.
Directions
- Shake the can and test on a small area first.
- Spray from 10–15 cm.
- No wiping needed; it evaporates on its own.
Packaging
Aerosol, 12 cans per box
KCA-1788Multi-Purpose Penetrant
Multi-purpose penetrant and lubricant: frees rust, displaces moisture, non-conductive.
Function
Loosens rust on nuts, bolts and screws, lubricates hard-to-reach points, leaves a clear anti-rust film and prevents moisture damage.
Benefits
- Penetrates rust and protects tools
- Multi-purpose lubricant, stops squeaks
- Clear protective anti-rust film
- Non-conductive, prevents moisture short circuits
Applications
Nuts, bolts, screws, hinges, locks, lathes, drills, electronics, switches and sockets.
Packaging
Aerosol, 12 cans per box
KCA-1795Spot Cleaner & Degreaser
Fast-drying aerosol degreaser that cleans without dismantling.
Function
High-pressure, fast-drying cleaner/degreaser that removes dirt, oil and grease thoroughly without dismantling, even in hard-to-reach spots. A replacement for solvents that are hazardous to users and the environment.
Benefits
- Strong cleaning power
- Non-flammable
- Ozone-safe
- Fast-drying, no residue
Applications
Bearings, compressors, spare parts, pumps, dynamos, coils, chains, relays, solenoids and switches.
Packaging
Aerosol, 12 cans per box
Application photos
KCA-1796Rust Preventive Oil
Long-term (1–2 year) rust protection for moulds, spare parts and tools.
Function
Leaves a clear, amber, non-tacky film. Rust protection for moulds, metal stampings, spare parts and tools in long-term storage or harsh weather.
Benefits
- Long-term rust protection, 1–2 years
- Non-tacky; resists harsh weather, humidity and salt water
Applications
Marine equipment, boat trailers, moulds/dies, spare parts, electric motors, machinery and metal surfaces.
Directions
- Clean off dust, oil and grease.
- Spray from 20–25 cm.
- Allow 10–15 minutes to dry.
- Before reuse, clean off with diesel/petrol (brush or soak) and wipe dry.
Packaging
Aerosol 12 cans per box · 5 L gallon
How We Work
From site survey to final report
- No fee
Site survey
We check the equipment condition, type of deposits and system volume. Free within Greater Jakarta.
Requirement calculation
We calculate the chemical quantity and job duration, and tell you honestly.
Demo or sample test
If needed, we prove the chemical and method work on your equipment before you buy.
- No fee
Execution, no service fee
Clients purchase only the chemicals. Work is scheduled during shutdowns: nights, weekends or public holidays.
Before–after report
We hand over photo documentation and job notes. If the result is not yet satisfactory, we repeat the work until it is complete.
Ongoing care
Routine water treatment and technical support, including a 24-hour emergency line.
On-site work documentation
Guarantees
Our guarantees
Demo, test & sample
We can demonstrate our chemicals and methods first against your company's standards.
Rework until clean
If the cleaning result is not satisfactory, we repeat the work.
Money-back guarantee
Products can be returned if specs differ from the tested sample.
Swap-back guarantee
Aerosol products can be exchanged if they jam with content still inside.
ISO-compliant
Every product has an MSDS and labels that meet ISO standards.
Why choose SKS
No application service fee
Clients purchase only the chemicals. Our technicians' work is not billed separately, and site surveys within Greater Jakarta are complimentary.
Official sole distributor of KCA
You buy directly from KCA's sole distributor, so products and technical support come from one source.
Honest about what you need
We protect the KCA name. We tell you how much chemical you really need, with no overpromising.
Fast response
Equipment problems directly affect output and cost, so we follow up every client request promptly.
24-hour standby
We routinely work at night, on weekends and on public holidays while your machines are down.
Accountable for results
Every job ends with a before–after report.
“We are committed to being your long-term partner by consistently maintaining the quality of our work.”
Projects
Project portfolio
Drag the slider on each photo to compare the condition before and after the work.
BeforeAfter
BeforeAfterQuenching oil cooler cleaning
Cleaning
BeforeAfterCooling tower cleaning
CleaningBeforeAfterChiller fan cleaning
Cleaning
BeforeAfterPrecision air conditioner (PAC) cleaning
Cleaning
BeforeAfterSelf-levelling floor coating
Coating
BeforeAfterEpoxy pipe coating
Coating
BeforeAfterHigh-heat chimney coating
Coating
BeforeAfterAlkyd coating for lamp posts
CoatingClients
Trusted by manufacturers across Greater Jakarta
PT Bridgestone Tire Indonesia
PT Yamaha Motor Parts Manufacturing Indonesia
PT Sharp Semiconductor Indonesia
PT YKK Zipper Indonesia- PT YKK Zipco Indonesia
PT Uni-Charm Indonesia Tbk
PT Air Liquide Indonesia
PT Indofarma Tbk
PT Minebea AccesSolutions Indonesia
PT Jidosha Buhin Indonesia
PT Ihara Manufacturing Indonesia
PT Teraoka Seisakusho Indonesia
PT Toyo Seal Indonesia
PT Meidoh Indonesia
PT Opuco Indonesia
PT Automotive Fasteners Aoyama Indonesia
PT Foxconn Technologies Indonesia
FAQ
Frequently asked questions
Is there a fee for the application service?
There is no service fee. Clients purchase only the KCA chemicals required, and our technicians' work is not billed separately. Site surveys within Greater Jakarta are also complimentary.
How long does chemical cleaning of a cooling tower or chiller take?
It depends on the unit size and how thick the scale is. After the survey we give you a clear time estimate, and the work can be scheduled around your shutdown.
Will the chemicals damage pipes or metal parts?
Our cleaning chemicals contain corrosion inhibitors, so scale and rust dissolve without attacking the metal. For sensitive materials such as aluminium and galvanised steel, we select a suitable product.
Can the work be carried out at night or on holidays?
Yes. We routinely work outside production hours so that your plant does not incur additional downtime.
Can we see a demo before buying?
Yes. We can run a demo or sample test at your site to prove the results.
How often does a cooling tower need treatment?
In a routine program our technicians visit twice a week for chemical dosing, and the water is analysed monthly. The frequency can be adjusted to your water conditions.
Do you serve areas outside Greater Jakarta?
Our main area is Greater Jakarta, including Bekasi, Cikarang and Karawang. We can serve other locations with additional transport and accommodation costs.
Can we buy the chemicals only?
Yes. KCA chemicals are available in 25 kg / 25 L pails. Technical data for each product is in the Products section.
Contact
Discuss your equipment maintenance needs with us
JakartaBogorDepokTangerangBekasiCikarangKarawang
Free site surveys across Greater Jakarta. We also serve other locations with additional transport and accommodation costs.
- Head Office & ShowroomJl. Kapuk Raya, Ruko Gg. Sinar No. 1, Jakarta 11720
- Phone(021) 5437 1111 · (021) 5437 1333
- Emailkca_sks@cbn.net.id
- Fax(021) 5455 784